Nitromaster Toolbars

The AG Systems Nitromaster Pull Type Toolbars are designed for today’s modern farmer. Built to be pulled by the largest 4 x 4 tractors, these extra-rugged applicators will stand up where others have failed.

The main frame is formed from 4″ x 6″ Tubular steel with 1/2″ walls. Designed to carry a heavy load of disc covers, rolling coulters and spring bundles, even at 15″ spacings the Nitromaster Toolbar will maintain the balance needed for smooth, easy pulling.

7200 Series Toolbar – Pull Type Applicator 34′ – 41′

7200 Series ToolbarDesigned and built for today’s modern farmer.

Pre-plant NH3 Application • Side-Dress NH3 Application • Strip-till or Zone Banding

Whatever your requirements the 7200 is flexible enough to fulfill your in field needs.

Features:

  • Heavy Duty 4″ x 6″ x 1/2 ” wall tubing will stand up where others have failed
  • Designed to carry the heavy loads of coulters, spring bundles & disc covers
  • Built to adapt to most all row spacing
  • Adjustable walking tandem axles
  • Master/Slave designed hydraulic lift system provides a uniform lift

 

7200 Series Toolbar Nitromaster Toolbars
New minimum maintenance coulter design! Totally greaseless hub & frame. Patent Pending. The only minimum maintenance disc cover. Spring loaded, offered in 13″ or 18″ blades. Greaseless hub design. Patent Pending.
Nitromaster Toolbars Nitromaster Toolbars
This extra heavy duty Cat III, combination tractor – truck Perfect Hitch is adjustable to fit most application needs. All Nitromaster Toolbars feature wings that float up and down to insure uniform nutrient placement.
Nitromaster Toolbars Nitromaster Toolbars
Steel Hinge Plates and 1-3/4″ Steel pins are the heaviest in the industry. All hinge points are greaseable. Adjustable, telescoping rear hitch extends 12″ and swings 26″ side to side.
Specifications

  • Available in sizes 21′, 27′, 32′ & 42′
  • Tubing size 4″ x 6″, 1/2 wall
  • Main frame width 13’9″
  • Transport height 12’2″
  • 10,000 pound capacity pole jack
  • Adjustable walking tandem hyd lift wheels
  • 11L x 15 Implement tires on 8″ rims
  • Hydraulic wing folds to 117 degrees
  • 38″ center to center between ranks
Options

  • Row markers for strip till applications
  • 7-pin flashing/warning light kit
  • Hydraulic selector valve
  • Rolling coulter assemblies
  • Single or double spring loaded disc covers
  • Meter/Controller assemblies
  • Dual manifolds
  • Spring bundled or coil shanks

 

8000 Series – Pull Type Applicator 34′ – 42′ – 52′

Pre-plant NH3 Application • Strip-till or Zone Banding

Designed to carry the heavy loads required by today’s custom applicator

Features:

  • Heavy Duty 4″ x 6″ x 1/2 ” wall tubing will stand up where others have failed
  • Designed to carry the heavy loads of coulters, spring bundles & disc covers.
  • Built to adapt to most all row spacing
  • The only true walking tandem axle in the industry
  • Master/Slave designed hydraulic lift system provides a uniform lift.
  • Featuring the largest walking tandem in the industry
  • Uniquely balanced for smooth easy pulling both in and out of the field.

 

Nitromaster Toolbars
New minimum maintenance coulter design! Totally greaseless hub & frame. Patent Pending. The only minimum maintenance disc cover. Spring loaded, offered in 13″ or 18″ blades. Greaseless hub design. Patent Pending.
Nitromaster Toolbars Nitromaster Toolbars
This extra heavy duty Cat III, combination tractor – truck Perfect Hitch is adjustable to fit most application needs. All Nitromaster Toolbars feature wings that float up and down to insure uniform nutrient placement.
Nitromaster Toolbars Nitromaster Toolbars
Steel Hinge Plates and 1-3/4″ Steel pins are the heaviest in the industry. All hinge points are greaseable. Adjustable, telescoping rear hitch extends 12″ and swings 26″ side to side.
Specifications

  • Available in sizes 32′, 42′ & 52′
  • Tubing size 4″ x 6″, 1/2 wall
  • Main frame width 16′
  • Transport height 13’4″
  • 10,000 pound capacity pole jack
  • Hydraulic tandem axle lift wheels
  • 11L x 15 Implement tires on 8″ rims
  • Hydraulic wing folds to 117 degrees
  • 38″ center to center between ranks
Options

  • Row markers for strip till applications
  • 7-pin flashing/warning light kit
  • Hydraulic selector valve
  • Rolling coulter assemblies
  • Single or double spring loaded disc covers
  • Spring bundled or coil shanks
  • Meter/Controller assemblies
  • Dual manifolds
  • 3/8″ or 1/2″ EVA hose

 

3000 Series – 3 Point Applicator 32′ – 27′ – 41′

Nitro 3000 SeriesThe 3000 Series Nitromaster Toolbar is the most rugged 3 point toolbar in the industry today. This 4″ x 6″ heavy walled toolbar features a Cat II and a Cat III 3 point hitch. Hydraulic wing fold is standard with the wings folding to 117 degrees.

Features:

  • Adjustable gauge wheels with 6.70 x 15 tires
  • Nurse tank hitch is telescoping and adjustable
  • Inline transport for long distance towing
  • Built to handle the weight of Coulters, Disc Covers and Spring Bundled Shanks
  • Built to adapt to all row spacings
  • 13′ 6″ wide center section
Nitro 3000 Series Nitro 3000 Series

Nitromaster 8500 Series 62′- Pull Type Applicator

Pre-plant NH3 • Fall Application • Strip-till or Zone Banding.

The all new 8500 is Big, Strong and Flexible to handle all of your field requirements.

NH 8500 Series

Features:

  • Super Heavy duty 6″ x 6″ x 1/2″ wall tubing the heaviest on the market today.
  • Designed to carry the heavy loads of coulters, spring bundles & disc sealers.
  • Built to adapt to most row spacing
  • Master/Slave designed hydraulic lift system provided a uniform lift.
  • Heavy duty walking tandem axles.

NH 8500 Series

The Most Durable Fertilizer Coulter Built Today

1 Year Limited Warranty

A Totally Greaseless Hub Design

  • Preloaded 525# cutting pressure
  • Capable of delivering up to 1040 # of residue slicing pressure
  • 2-9″ chrome silica alloy springs
  • 6″ vertical blade travel
  • 36° swivel movement left to right
  • 1″ x 3″ shank
  • 4 bolt wagon hub
  • Choose from 3 different models
  • AG-36 Single Spring
  • Ag-37, AG-38 Double Spring designed for strip till or deep placement of fertilizer

Built heavy enough to withstand today’s farming practices.

Patented “Lubed for Life” Seal System!

  • This totally sealed hub is prepacked with grease – no grease zerk is needed.
  • Hub capacity is rated for 2,760 lbs. – twice the capacity of any coulter on the market.

 

Smooth Blade Fluted Blade Notched Blade

 

 Chose from 3 different knife options:

  1. Dry or liquid forward swept knife, designed for deep placement of fertilizer
  2. NH3 knife with tube
    1. 3/8″ tube
    2. 1/2″ tube
  3. High Pressure nozzle bracket, designed for liquid fertilizer injected into the ground.

The Most Versatile Ammonia Sealer in the World

Ag System Blades Specifically designed for No-Till farming practices

  • 1 Year Limited Warranty
  • A Totally Greasless Hub Design

Built Specifically for the Custom Applicator

Ag System Blades A Hub Built for High Application Speeds

  • 1-1/6″ Spindle welded to a 6″ heavy-duty plate
  • 1″ Tapered roller bearings
  • Slotted nut with cotter pin
  • Counter-sunk dust cap keeps the dirt out
  • No grease zerks
  • Patented hub seal design really keeps the dirt out!
    • Actually 7 seals in one all individually grease packed 10 times heavier then the conventional grease seal
    • Press Fitted rubber design provides a better seat
    • Seal is pressed onto the spindle and rotates with the hub
Ag System Blades Blades Are Reversible

  • 13″ Smooth edged blades
  • 18″ Smooth or Notched edged blades
  • Fits all standard NH3 shanks
  • Blades are adjustable
  • Blades are set forward to capture and replace soil
  • Heavy-duty 2-1/2″ x 1/2″ arms
  • Extra heavy-duty reinforced “A” frame with adjustable mounts
Ag System Blades Unique Spring Design

  • Relieves “A” frame stress
  • Allows trash to flow through freely
  • Spring is fully loaded in the rest position
  • Won’t compromise the knife depth due to the Spring bottoming out
  • No need to adjust the disc cover if running at different depths
  • Features the most travel of any spring loaded disc cover
    • 13″ blade has 11″ of vertical travel
    • 18″ blade has 14″ of vertical travel
Ag System Blades Also Designed in Single Blade Package*With all of the same features found in the double disc package

New Super Shooter Stand

Download Spec Sheet
Super Shooter StandSuper Shooter Stand

Super Shooter Stand