You are here: Home - Tenders

Tenders

Case IH Tyler Tenders

Ag System TendersTyler Tenders from Case IH are built to move mountains of fertilizer. With capacities from 10 to 24 tons (9000 to 21,600 kg), Case IH is sure to offer a unit to suit your operation. They’re built strong to withstand constant use over rough roads and driving through ditches. Discharge heights of augers easily reach over the tallest floatation applicators. That means less shoveling and faster turnaround times. Discharge rates of 3,500 pounds (1588 kg) or more keep your operation moving at peak efficiency.

Print FriendlyPrint Friendly

Body Unitized one piece body constructed with 409 stainless steel. Two compartment 409 stainelss steel hopper with individual control gates. Less pump and PTO.
Optional  N/A
Capacity
cu. ft. (cu. m.)		 3443 (9.71)
Tare Weight
lbs. (kg)		 2,750 (1,247)
Auger Reach (Raised)
in. (cm) 		 120 (305)
Discharge Height (Raised)
in. (cm) 		 131 (333)
Base Dimensions
in. (cm) 		 34 x 144 (86 x 366)
Body Dimensions
in. (cm) 		 95 x  144 (241 x 366)
Body Height
in. (cm)		 79.5 (202)
Auger Size
in. (cm)		 10 (25)
Additional Features  • Ladder
• DOT lights, wiring
• Harness
• Fenders
• 72 in. (183 cm) flexible discharge
Print FriendlyPrint Friendly

Body Unitized one piece body constructed with 409 stainless steel. Two separate 409 stainless hoppers with four individual control gates. Large clean out doors under each hopper. Rear clean out door. Less pump and PTO.
Optional  4 compartments
Capacity
cu. ft. (cu. m.)		 514 (14.55)
Tare Weight
lbs. (kg)		 3,435 (1556)
Auger Reach (Raised)
in. (cm) 		 • 106 (269) – std. 13 ft. (396 cm) auger
• 133 (338) – opt. 16 ft. (488 cm) auger
Discharge Height (Raised)
in. (cm) 		 • 119 (302) – std. 13 ft. (396 cm) auger
• 142 (361) – opt. 16 ft. (488 cm) auger
Base Dimensions
in. (cm) 		 34 x 196 (86 x 496)
Body Dimensions
in. (cm) 		 96 x 192 (244 x 488)
Body Height
in. (cm)		 81 (206)
Auger Size
in. (cm)		 10 (25)
Additional Features  • Front and rear ladders
• DOT lights, wiring harness
• Fenders
• Mud Flaps
• Hydraulic swivel auger (discharge 80 to 142 in. (203 to 361 cm) from base)
• 8 in. (20 cm) horizontal unloading auger to the 10 in. (25 cm) rear mounted-side unloading auger
• 72 in. (183 cm) flexible discharge
Print FriendlyPrint Friendly

Body Unitized one piece body constructed with 409 stainless steel. Three separate 409 stainless hoppers with six individual control gates. Large clean out doors under each hopper. Rear clean out door. Less pump and PTO.
Optional  6 compartments
Capacity
cu. ft. (cu. m.)		 771 (21.8)
Tare Weight
lbs. (kg)		 4,500 (2041)
Auger Reach (Raised)
in. (cm) 		 • 106 (269) – std. 13 ft. (396 cm) auger
• 133 (338) – opt. 16 ft. (488 cm) auger
Discharge Height (Raised)
in. (cm) 		 • 119 (302) – std. 13 ft. (396 cm) auger
• 142 (361) – opt. 16 ft. (488 cm) auger
Base Dimensions
in. (cm) 		 34 x 292 (86 x 742)
Body Dimensions
in. (cm) 		 96 X 288 (244 X 732)
Body Height
in. (cm)		 81 (206)
Auger Size
in. (cm)		 10 (25)
Additional Features  • Front and rear ladders
• DOT lights, wiring harness
• Fenders
• Mud Flaps
• Hydraulic swivel auger (discharge 80 to 142 in. (203 to 361 cm) from base)
• 8 in. (20 cm) horizontal unloading auger to the 10 in. (25 cm) rear mounted-side unloading auger
• 72 in. (183 cm) flexible discharge
Print FriendlyPrint Friendly

The NEW 1612 Tender from Ag Systems

AG Systems 1612 Tender16 Ton Rear Discharge Tender Unloaded up to 5500 pounds per minute.

  • 500 Cu. Ft. Struck Capacity
  • 2 Compartment Hopper
  • Hydraulic Drive
  • Electric roll Tarp
  • 409 Stainless Steel painted white
  • Stainless Steel slide gates
  • 20′ x 12″ Stainless tube & screw
  • Mud Flaps, Fenders DOT Lights
Print FriendlyPrint Friendly